Volume 7, Issue 1, February 2019, Page: 35-41
Safety Assessment of Arsenic in Cosmetic Face-creams by Inductively Coupled Plasma Atomic Emission Spectrometer
Xijuan Tan, Laboratory of Mineralization and Dynamics, Chang’an University, Xi’an, China; College of Earth Sciences and Land Resources, Chang’an University, Xi’an, China
Hong Liu, Perkin Elmer Management (Shanghai) Co., Ltd, Shanghai, China
Zhuming Wang, Laboratory of Mineralization and Dynamics, Chang’an University, Xi’an, China; College of Earth Sciences and Land Resources, Chang’an University, Xi’an, China
Minwu Liu, Laboratory of Mineralization and Dynamics, Chang’an University, Xi’an, China; College of Earth Sciences and Land Resources, Chang’an University, Xi’an, China
Received: Feb. 24, 2019;       Accepted: Apr. 2, 2019;       Published: Apr. 22, 2019
DOI: 10.11648/j.ajac.20190701.14      View  29      Downloads  17
Abstract
This paper presented the arsenic determination in four different brands of cosmetic face-creams to provide valuable information on the safety levels for consumers. The cosmetic samples were decomposed by acidic digestion method and then taken for arsenic quantification using inductively coupled atomic emission spectrometry (ICP-AES). The digestion efficiency of acid mixtures including concentrated HNO3, HNO3–HClO4, HNO3–H2O2 and aqua regia was discussed in terms of digestion loss and time consumption. The ICP-AES analyzing results, with determination recoveries of 95.4% ~ 105.2% and relative standard deviations less than 3.0% (n = 5), revealed arsenic contents in the face-creams are in the ranges of 0.68 ~ 3.28 mg·kg−1. Obviously, the arsenic contents in some of the studied brands exceed the maximum recommended value of 2.0 mg·kg−1 set by China. These results lead to the conclusion that constant control of arsenic content in cosmetics should be seriously considered. The successful arsenic determination in cosmetic face-creams by digestion pattern of concentrated HNO3, with simplicity, higher efficiency, less reagent consumption and less analytical time well demonstrates the good analytical capability of this method, promising a great possibility for large batches of cosmetic toxic metal monitoring.
Keywords
Safety Assessment, Cosmetic Face-Creams, Arsenic Determination, Acidic Digestion, ICP-AES
To cite this article
Xijuan Tan, Hong Liu, Zhuming Wang, Minwu Liu, Safety Assessment of Arsenic in Cosmetic Face-creams by Inductively Coupled Plasma Atomic Emission Spectrometer, American Journal of Applied Chemistry. Vol. 7, No. 1, 2019, pp. 35-41. doi: 10.11648/j.ajac.20190701.14
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
B. Bocca, A. Pino, A. Alimonti, and G. Forte (2014) Toxic metals contained in cosmetics: A status report. Regulatory Toxicology and Pharmacology 68, 447-467.
[2]
V. J. Brown (2013) Metals in lip products: A cause for concern. Environmental Health Perspectives 121, 196.
[3]
M. Aslam, S. S. Davis and M. A. Healy (1979) Heavy metals in some Asian medicines and cosmetics. Public Health 93, 274-284.
[4]
E. L. Sainio, R. Jolanki, E. Hakala, and L. Kanerva (2000) Metals and arsenic in eye shadows. Contact Dermatitis 42, 5-10.
[5]
J. G. Ayenimo, A. M. Yusuf, A. S. Adekunle, and O. W. Makinde (2010) Heavy metal exposure from personal care products. Bulletin of Environmental Contamination and Toxicology 84, 8-14.
[6]
R. S. Zulaikha, S. N. Syed Ismail, and S. M. Praveena (2015) Hazardous ingredients in cosmetics and personal care products and health concern: A review. Public Health Research 5, 7-15.
[7]
H. Ullah, S. Noreen, Fozia, A. Rehman, A. Waseem, S. Zubair, M. Adnan, and I. Ahmad (2017) Comparative study of heavy metals content in cosmetic products of different countries marketed in Khyber Pakhtunkhwa, Pakistan. Arabian Journal of Chemistry 10, 10-18.
[8]
A. D. Kligerman, and A. H. Tennant (2007) Insights into the carcinogenic mode of action of arsenic. Toxicology and Applied Pharmacology 222, 281-288.
[9]
J. X. Pereira, and T. C. Pereira (2018) Cosmetics and its health risks. Global Journal of Medical Research 18, 63-66.
[10]
K. Prasertboonyai, B. Liawraungrath, T. Pojanakaroon, and S. Liawraungrath (2016) Mercury(II) determination in commercial cosmetics and local Thai traditional medicines by flow injection spectrophotometry. International Journal of Cosmetic Science 38, 68-76.
[11]
F. A. Ababneh, and I. F. Al-Momani (2018) Assessments of toxic heavy metals contamination in cosmetic products. Environmental Forensics 19, 134-142.
[12]
J. Y. Chung, S. D. Yu, Y. S. Hong, (2014) Environmental source of arsenic exposure. Journal of Preventive Medicine & Public Health 47, 253-257.
[13]
P. B. Tchounwou, A. K. Patlolla, and J. A. Centeno, (2003) Carcinogenic and systemic health effects associated with arsenic exposure-A critical review. Toxicologic Pathology 31, 575-588.
[14]
K. Jomova, and M. Valko (2011) Advances in metal-induced oxidative stress and human disease. Toxicology 283, 65-87.
[15]
V. Pachauri, and S. J. S. Flora (2010) Chelation in metal intoxication. International Journal of Environmental Research and Public Health 7, 2745-2788.
[16]
T. Rujiralai, N. Juansai, and W. Cheewasedtham (2018) Arsenic determination in soils and hair from schools in past mining activity areas in Ron Phibun district, Nakhon Si Thammarat province, Thailand and relationship between soil and hair arsenic. Chemical Paper 72, 381-391.
[17]
H. J. Sun, B. Rathinasabapathi, B. Wu, J. Luo, L. P. Pu, L. Q. Ma, (2014) Arsenic and selenium toxicity and their interactive effects in humanity: An overview. Environment International 69, 148-586.
[18]
P. Bhattacharjeea, D. Chatterjeea, K. Singhb, and A. Giri (2013) Systems biology approaches to evaluate arsenic toxicity and carcinogenicity: An overview. International Journal of Hygiene and Environmental Health 216, 574-586.
[19]
H. Gibb, C. Haver, D. Gaylor, S. Ramasamy, J. S. Lee, D. Lobdell, T. Wade, C. Chen, P. White, and R. Sams, (2011) Utility of recent studies to assess the National Research Coun­cil 2001 estimates of cancer risk from ingested arsenic. Environmental Health Perspective 119, 284-290.
[20]
Ministry of Health of the People’s Republic of China. (2015) Safety and technical standards for cosmetics, Beijing, China, 166.
[21]
T. Mohammed, E. Mohammed, and S. Bascombe, (2017) The evaluation of total mercury and arsenic in skin bleaching creams commonly used in Trinidad and Tobago and their potential risk to the people of the Caribbean. Journal of Public Health Research 6, 184-189.
[22]
P. Olmedo, A. Pla, A. F. Hernández, F. Barbier, L. Ayouni, and F. Gil (2013) Determination of toxic elements (mercury, cadmium, lead, tin and arsenic) in fish and shellfish samples. Environment International 59, 63-72.
[23]
R. R. Rasmussen, Y. Qian, and J. J. Sloth (2013) SPE HG-AAS Method for the determination of inorganic arsenic in rice--results from method validation studies and a survey on rice products. Analytical and Bioanalytical Chemistry 405, 7851-7857.
[24]
N. R. Cha, J. K. Lee, Y. R. Lee, H. J. Jeong, H. K. Kim, and S. Y. Lee (2010) Determination of iron, copper, zinc, lead, nickel and cadmium in cosmetic matrices by flame atomic absorption spectroscopy. Analytical Letters 43, 259-268.
[25]
W. Holak (1969) Gas-sampling technique for arsenic determination by atomic absorption spectrophotometry. Analytical Chemistry 41, 1712-1713.
[26]
C. X. Xu, W. S. Lin, H. M. Hu, and L. F. Cai (2013) Determination of arsenic and mercury in cosmetics by atomic fluorescence method with graphite furnace digestion. China Surfactant Detergent & Cosmetics 43, 78-80.
[27]
R. Domínguez-González, L. González Varela, and P. Bermejo-Barrera (2014) Functionalized gold nanoparticles for the detection of arsenic in water. Talanta 118, 262-269.
[28]
M. A. Tahir, H. Rasheed, and A. Malana (2012) Method development for arsenic analysis by modification in spectrophotometric technique. Drinking Water Engineering and Science 1, 195-201.
[29]
L. H. Wang, and H. J. Tien (1994) Determination of lead, arsenic and mercury in cosmetic formulations at modified electrodes. International Journal of Cosmetic Science 16, 29-38.
[30]
D. J. Butcher (2010) Advances in inductively coupled plasma optical emission spectrometry for environmental analysis. Instrumentation Science & Technology 38, 458-469.
[31]
R. Rezaaiyaan, and G. M. Hieftje (1985) Analytical characteristics of a low-flow, low-power inductively coupled plasma. Analytical Chemistry 57, 412-415.
[32]
S. Y. Ng, F. Dewi, J. Wang, L. P. Sim, R. Y. C. Shin, and T. K. Lee (2015). Development of a cosmetic cream certified reference material: Certification of lead, mercury and arsenic mass fractions in cosmetic cream. International Journal of Mass Spectrometry 389, 59-65.
[33]
N. M. Hepp (2015) Determination of arsenic, chromium, lead, manganese, and mercury in certifiable color additives by inductively coupled plasma/mass spectrometry. Journal of AOAC INTERNATIONAL 98, 160-164.
[34]
C. Agatemor, and D. Beauchemin (2011) Matrix effects in inductively coupled plasma mass spectrometry: A review. Analytica Chimica Acta 706, 66-83.
[35]
M. A. Almessiere, R. Altuwiriqi, M. A. Gondal, R. K. Aldakheel, and H. F. Alotaibi (2018) Qualitative and quantitative analysis of human nails to find correlation between nutrients and Vitamin D deficiency using LIBS and ICP-AES. Talanta 185, 61-70.
[36]
R. Saidalavi, A. Hashim, K. B. Kishor, P. K. Leena, and P. Adake (2017) Analysis of lead and arsenic in cosmetics and assessment of students awareness about cosmetic toxicity. International Journal of Basic & Clinical Pharmacology 6, 1426-1430.
[37]
A. M. Fioroto, and P. V. Oliveira (2017) Microwave-assisted digestion with a single reaction chamber for mineral fertiliser analysis by inductively coupled plasma optical emission spectrometry. Spectroscopy Letters 50, 550-556.
[38]
C. Cui, B. Hu, B. Chen, and M. He (2013) Ionic liquid-based magnetic solid phase extraction coupled with inductively coupled plasma-optical emission spectrometry for the determination of Cu, Cd, and Zn in biological samples. Journal of Analytical Atomic Spectrometry 28, 1110-1117.
[39]
A. A. Alqadami, M. A. Abdalla, Z. A. Alothman, and K. Omer (2013) Application of solid phase extraction on multiwalled carbon nanotubes of some heavy metal ions to analysis of skin whitening cosmetics using ICP-AES. International Journal of Environmental Research and Public Health 10, 361-374.
[40]
A. A. Alqadami, M. Naushad, A. M. Abulhassan, M. R. Khan, Z. A. Alothman, S. M. Wabaidur, and A. A. Ghfar (2017) Determination of heavy metals in skin-whitening cosmetics using microwave digestion and inductively coupled plasma atomic emission spectrometry. IET Nanobiotechnology 11, 597-603.
[41]
C. Capelli, D. Foppiano, G. Venturelli, E. Carlini, E. Magi, and C. Ianni (2014) Determination of arsenic, cadmium, cobalt, chromium, nickel, and lead in cosmetic face-powders: Optimization of extraction and validation. Analytical Letters 47, 1201-1209.
[42]
A. Agazzi, and C. Pirola (2000) Fundamentals, methods and future trends of environmental microwave sample preparation. Microchemical Journal 67, 337-341.
[43]
I. O. Akinyele, and O. S. Shokunbi, (2015) Comparative analysis of dry ashing and wet digestion methods for the determination of trace and heavy metals in food samples. Food Chemistry 173, 682-684.
[44]
O. Al-Dayel, J. Hefne, and T. Al-Ajyan (2011) Human exposure to heavy metal from cosmetics. Oriental Journal of Chemistry 27, 1-11.
[45]
S. Y. I. Issa, R. A. Maguid, and M. K. AlMazroua (2016) Determination of toxic contents and metals in different cosmetic products in the Arabian market. Journal of Environmental and Analytical Toxicology 6, 1-5.
[46]
E. A. M. Farrag, M. H. E. A. Sei'Leek, and M. I. A. Alsayyed (2015) Study of heavy metals concentration in cosmetics purchased from Jordan markets by ICP-MS and ICP-OES. Aes Bioflux 7, 383-394.
Browse journals by subject